碳酸二甲酯在固体碱上吸附和活化的原位红外光谱研究

采用原位红外技术研究了碳酸二甲酯在氧化镁、氟化镁、镁铝复合氧化物和氟改性的镁铝复合氧化物4种固体碱表面上的吸附和活化行为。结果表明:碳酸二甲酯以单、双齿两种形态吸附于固体碱的表面,双齿吸附的比单齿吸附的更易活化。碳酸二甲酯吸附于氧化镁和镁铝复合氧化物上活化生成甲氧基,吸附于氟化镁上活化生成甲氟基;而吸附于氟改性的镁铝复合氧化物上优先活化生成甲氟基,随着吸附表面温度的升高,逐渐有甲氧基生成,说明氟改性的镁铝复合氧化物是一种优良的甲基化反应催化剂。     

Ce-EU-1分子筛的合成和表征

采用水热法,以溴化六甲双铵（HMBr2）为模板剂,硅溶胶、偏铝酸钠为硅铝源,以六水硝酸铈为铈源合成了稀土Ce-EU-1分子筛,并通过XRD、FTIR、紫外-可见漫反射光谱、热重分析（TG-DTG）和氮气吸附-脱附等测试手段对合成样品的孔道结构、物化性能及Ce的存在状态进行了表征。XRD结果表明,合成样品不仅具有很高的纯度和结晶度,为典型的立方有序排列的EU-1结构,而且部分Ce已取代Si或Al进入微孔分子筛的骨架。样品的FTIR图谱在980cm-1附近有明显的Si—O—Ce特征吸收峰,证明Ce存在于分子筛的骨架中。紫外-可见漫反射图谱显示,在253nm附近出现O—Ce之间的电子跃迁特征峰,进一步证明了Ce进入了分子筛骨架。氮气吸附-脱附结果表明了Ce的掺入对分子筛的物化性能和孔道结构产生了影响。同时考察了镧系其他金属离子（Ln：La、Nd、Sm和Gd）对EU-1分子筛的影响,发现随着镧系离子半径的减小,Ln-EU-1分子筛的相对结晶度逐渐降低,晶胞体积减小。     

Fiber-optic curvature sensor with optimized sensitive zone

A novel fiber-optic sensor that can measure curvature directly has been developed previously. In this paper, the transduction of curvature to light intensity is described analytically by using the geometrical optics analysis. The mathematical model allows a quantitative optimization of the sensor without having to produce many sensors with slightly different combinations of parameters in order to accomplish a similar objective experimentally. The Monte Carlo simulation by ray tracing and an orthogonal matrix are used to optimize the fiber-optic sensor’s configuration. The results show that the depth of the sensitive zone and the number of teeth are two main parameters that affect the sensor’s sensitivity and the optimum number of teeth is 55, which is in agreement with the mathematical model.     

Atomic NOON state generation in distant cavities by virtual excitations

A general scheme of generating NOON states of virtually-excited 2N atoms is proposed. The two cavities are fibre-connected with N atoms in each cavity. Although we focus on the case of N = 2, the system can be extended to a few atoms with N 〉2. It is found that all 2N atoms can be entangled in the form of NOON states if the atoms in the first cavity are initially in the excited states and atoms in the second cavity are all in the ground states. The feasibility of the scheme is carefully discussed, it shows that the NOON state with a few atoms can be generated with good fidelity and the scheme is feasible in experiment.     

Atomic N00N state generation in distant cavities by virtual excitations

A general scheme of generating N00N states of virtually-excited 2N atoms is proposed. The two cavities are fibre-connected with N atoms in each cavity. Although we focus on the case of N=2, the system can be extended to a few atoms with N>2. It is found that all 2N atoms can be entangled in the form of N00N states if the atoms in the first cavity are initially in the excited states and atoms in the second cavity are all in the ground states. The feasibility of the scheme is carefully discussed, it shows that the N00N state with a few atoms can be generated with good fidelity and the scheme is feasible in experiment.     

Microstructure and tribological behaviors of Ti6Al4V alloy treated by plasma Ni alloying

Ni modified layer was prepared on surface of the Ti6Al4V substrate by plasma surface alloying technique. Surface morphology, micro-structure, composition distribution, phase structure, and microhardness of the Ni modified layer were analyzed. Tribological performance of the Ni modified layer and Ti6Al4V substrate was investigated by using pin-on-disc tribometer. The results indicate that roughness of the Ni modified layer was increased due to formation of the micro-convex on the modified surface. The concentration of Ni gradually decreased from the surface to interior. The maximum content of Ni atoms was nearly 90%. The modified layer was composed of TiNi, Ti2Ni and Ti phases. The maximum microhardness of the Ni modified layer was about 677 HV_0.025 which was increased about two-fold of microhardness of the control Ti6Al4V substrate. Wear resistance of the Ni modified layer was improved obviously, and showed micro-abrasion wearing. The strengthened mechanism of the as-treated Ti6Al4V alloy is discussed.     

Electromagnetic properties and microwave absorption properties of BaTiO3-carbonyl iron composite in S and C bands

BaTiO₃ powders are prepared by sol-gel method. The carbonyl iron powder is prepared via thermal decomposition of iron pentacarbonyl. Then BaTiO₃-carbonyl iron composite with different mixture ratios was prepared using the as-prepared material. The structure, morphology, and properties of the composites are characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction, scanning electron microscopy (SEM), and a network analyzer. The complex permittivity and reflection loss of the composites have been measured at different microwave frequencies in S- and C-bands employing vector network analyzer model PNA 3629D vector. The effect of the mass ratio of BaTiO₃/carbonyl iron on the microwave loss properties of the composites is investigated. A possible microwave absorbing mechanism of BaTiO₃-carbonyl iron composite has been proposed. The BaTiO₃-carbonyl iron composite can find applications in suppression of electromagnetic interference, and reduction of radar signature.     

Sliding and oscillations in fisheries with on–off harvesting and different switching times

In this paper, we propose a fishery model with a discontinuous on–off harvesting policy, based on a very simple and well known rule: stop fishing when the resource is too scarce, i.e. whenever fish biomass is lower than a given threshold. The dynamics of the one-dimensional continuous time model, represented by a discontinuous piecewise-smooth ordinary differential equation, converges to the Schaefer equilibrium or to the threshold through a sliding process. We also consider the model with discrete time impulsive on–off switching that shows oscillations around the threshold value. Finally, a discrete-time version of the model is considered, where on–off harvesting switchings are decided with the same discrete time scale of non overlapping reproduction seasons of the harvested fish species. In this case the border collision bifurcations leading to the creations and destruction of periodic oscillations of the fish biomass are studied.     

基于微分变分不等式的多商品流网络动态模型

针对由多个制造商和多个零售商构成并且具有多商品流的供应链网络,建立了制造商、零售商之间从事微分Nash博弈的供应链网络动态模型.首先,在介绍微分变分不等式定义的基础上,利用微分变分不等式的方法建立了制造商、零售商以及供应链网络的均衡条件.然后,在正则条件下分析了供应链网络动态模型解的存在性条件.最后,利用数值算例验证了模型的合理性.     

Effect of heat transfer on the oscillatory behavior in partial oxidation of methane over nickel catalyst

Monte Carlo method was applied to simulate the oscillatory behavior during partial oxidation of methane under non-isothermal condition. The simulation was performed to examine the influences of heat transfer constant and particle size on the kinetic oscillation. The oscillatory period and amplitude were observed to increase with the increase of heat transfer constant. The increase of catalyst particle size was found to result in short oscillatory period and more or less regular oscillations combined with the formation of oxide down to L=100.